Precautions for safe operation of printing presses


Published on:

2019-01-03

Abstract: Printing machinery precautions-vigilance-common sense chapter: a survey of the supervision, inspection, testing and other precautions that should be noted in the safe operation of printing presses. The following content is compiled by Buy.com and provided for your reference. Printing machine safety operation precautions 1. lead machine is responsible for supervising the safety of machinery and equipment and crew. 2. before the operation, the operator must be neatly dressed in work clothes, work shoes, fasten the lapels and cuffs, the coat pocket does not contain easy to fall out of debris, do not wear a watch and a variety of ornaments. 3. before starting the machine, the machine should be added to the various oiling points, lubrication points and oil tank required lubricant (grease). 4. without approval, the Not this machine

Precautions for safe operation of printing presses
Abstract: Printing machinery precautions-vigilance-common sense chapter: a survey of the supervision, inspection, testing and other precautions that should be noted in the safe operation of printing presses. The following content is compiled by Buy.com and provided for your reference.

Precautions for safe operation of printing presses

1. Leaders are responsible for supervising the safety of machines and equipment and crew members.

2. Before the operation, the operator must put on the work clothes and shoes neatly, fasten the lapels and cuffs, and do not put any miscellaneous things in the clothes pocket that can easily fall out, and do not wear watches and various ornaments.

3. Before starting the machine, the required lubricant (grease) should be added to each oiling point, lubrication point and oil tank of the machine.

4. Without approval, non-crew members should not start and operate the machine without permission, and assistants and apprentices should work under the guidance of the leading machine.

5. Before starting the machine, check if there is any debris in all parts of the machine, and you must first give a signal (press the safety bell) and echo back and forth to make sure the machine is safe around before starting.

6. Before running the machine, reverse the point for a few weeks, and then positive point for a few weeks, so as not to have debris between the drum to destroy the rubber blanket, printing plates, etc.

7. During the operation of the machine, it is strictly forbidden to touch the working surface of the movement with hands, not allowed to repair and wipe the machine, not allowed to cross the rotating parts, to keep the machine protection device intact.

8. The crew should strictly guard their posts according to the division of labor, always pay attention to the operation of all parts of the machine, and stop immediately to deal with any problems found.

9. The workplace should be kept clean and unobstructed, and the ground. No clutter around the workbench and machine, maintenance tools and spare parts should be placed in the prescribed position.

10. When working, no one is allowed to laugh, play and make noise around the machine.

11. At the end of the work, clean the machine, protect the printing plate, scrub clean blanket, embossing cylinder and rolling pillow, turn off the power, fill in the work log.

12. Regular maintenance and repair of the machine, and fill in the maintenance and repair records.